Extinguisher holders

Fire Extinguisher Holders — Roll Bar & Roll Cage Mounts for Jeeps and UTVs

Carrying a fire extinguisher in your rig is good practice. Carrying one that rolls around the floorboard is just annoying. Badass Moto extinguisher holders mount a standard 2.5 lb extinguisher tight to your roll bar or roll cage in about a minute, with no drilling and no permanent mods. Five options below: quick-release roll bar holders for Jeep Wrangler, Gladiator, and Ford Bronco (black or red, single or 2-pack), and a padded roll cage holder for UTVs and side-by-sides. Heavy-duty webbing, stainless steel hardware, and a No-Hassle Lifetime Defect Warranty on every one.

Purpose-Built for Off-Road Safety

  • Secure mounting for fire extinguishers in UTV and side-by-side cabins
  • Designed for roll cage and tubular mounting points
  • Quick-release access in emergency situations
  • Built to withstand vibration, impacts, dust, and mud

Why Badass Moto Extinguisher Holders?

Reason Detail
No Drilling, No Brackets, No Permanent Mods Tool-free strap mount installs in about a minute. Three adjustable hook-and-loop straps wrap the roll bar or roll cage, cinch tight, and lock in. No drilling, no clamps that scratch your tubing, no holes you can't undo. Move it or remove it whenever.
Built to Take a Beating Heavy-duty woven webbing and corrosion-resistant stainless steel D-rings. The webbing holds up to sun, rain, mud, and dust without fraying or stretching. The hardware stays solid season after season. Cheap holders use thin nylon and plastic clips that crack under UV and cold.
Sized for Your Actual Rig Roll bar holders fit Jeep Wrangler (JK, JL, JLU, TJ, YJ, CJ), Jeep Gladiator, and Ford Bronco (2021 and newer), with stock or aftermarket roll bars. UTV holder fits Polaris RZR, Yamaha YXZ, Kawasaki Teryx, Honda Pioneer, Can-Am Maverick, and other UTVs and side-by-sides with stock or aftermarket roll cage tubing. All variants hold any standard 2.5 lb ABC fire extinguisher up to 3.25 inch diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1.
No-Hassle Lifetime Defect Warranty If a manufacturer defect occurs, we replace it. No expiration. No fees. No need to return the old holder. Most extinguisher holders give you 30 to 90 days.

Choose Your Holder

Two holder designs, five SKUs. Pick by vehicle first, then color or pack.

Your Vehicle Holder Available Options
Jeep Wrangler (JK, JL, JLU, TJ, YJ, CJ) Roll bar holder Black single, red single, black 2-pack, red 2-pack
Jeep Gladiator Roll bar holder Black single, red single, black 2-pack, red 2-pack
Ford Bronco (2021 and newer) Roll bar holder Black single, red single, black 2-pack, red 2-pack
Polaris RZR, Yamaha YXZ, Kawasaki Teryx, Honda Pioneer, Can-Am Maverick (and other UTVs / side-by-sides) UTV roll cage holder (padded non-slip backing) Black

Pick the right size for your vehicle. A snug, tight fit on the correct tubing diameter is what keeps the extinguisher locked in. Jeep, Gladiator, and Bronco roll bars use thicker tubing than UTV roll cages. The Jeep roll bar holder is designed for Jeep, Gladiator, and Bronco roll bars. The UTV roll cage holder is designed for UTV and side-by-side roll cages. Match the holder to the rig for the best fit.

Pro tip: Both holders fit any standard 2.5 lb ABC fire extinguisher up to 3.25 inch diameter (Kidde FA110, Amerex B417T, First Alert HOME1). Extinguisher not included. The 2-pack is for rigs running two extinguishers or buyers who want one for the daily and one for a second Jeep, Gladiator, or Bronco.

About Badass Moto: American rider-founded and family-operated since 2014, trusted by over 250,000 riders and drivers. Every holder is built for the conditions your rig actually sees, not a generic clamp with a logo slapped on it. Backed by a No-Hassle Lifetime Defect Warranty and a 30-day satisfaction return policy. We stand behind what we sell.

"Life is short. Live it, don't waste it."

Frequently Asked Questions

Which Badass Moto extinguisher holder fits my vehicle?

Pick by vehicle type. The Jeep roll bar holder fits Jeep Wrangler (JK, JL, JLU, TJ, YJ, CJ), Jeep Gladiator, and Ford Bronco (2021 and newer), with stock or aftermarket roll bars. The UTV roll cage holder is sized for the smaller-diameter roll cage tubing on UTVs and side-by-sides like the Polaris RZR, Yamaha YXZ, Kawasaki Teryx, Honda Pioneer, and Can-Am Maverick. The two holders are designed for different tubing diameters, so match the holder to the rig for the best fit.

What size fire extinguisher fits these holders?

All Badass Moto extinguisher holders fit any standard 2.5 lb ABC fire extinguisher up to 3.25 inch diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. They do not fit larger 5 lb or commercial extinguishers. They are also not designed for the smaller aerosol-style extinguishers, which are too narrow for the strap system to hold securely. Many tall plastic water bottles fit if you want to use the holder for hydration.

Is the fire extinguisher included?

No. Our product photos show an extinguisher in the holder so you can see how it mounts, but the extinguisher is sold separately. We recommend a standard 2.5 lb ABC extinguisher up to 3.25 inch diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. You'll find them at auto parts stores, big box stores, hardware stores, and online.

Will these holders fit aftermarket roll bars or roll cages?

Yes. The Jeep roll bar holder fits stock or aftermarket roll bars on Jeep Wrangler, Gladiator, and Ford Bronco. The UTV roll cage holder fits stock or aftermarket roll cage tubing on UTVs and side-by-sides. Three adjustable hook-and-loop straps cinch tight on either setup.

Do Badass Moto extinguisher holders include a warranty?

Yes. Every Badass Moto extinguisher holder is covered by our No-Hassle Lifetime Defect Warranty. If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder. You can also return the product within 30 days of purchase for a refund or exchange. Normal wear and tear or damage caused by chemicals, fire, or other abuse is not considered a manufacturing defect.

Where are Badass Moto extinguisher holders made?

Badass Moto is an American rider-founded and family-operated company based in the United States since 2014. Our extinguisher holders are designed in the USA and manufactured to our specifications overseas, using the best materials and production we can find. Across our broader catalog, some products are made in the United States and others are sourced globally. Like most Badass Moto products, our extinguisher holders are backed by our No-Hassle Lifetime Defect Warranty.

Trusted by over 250,000 riders since 2014.
Built for riders who take off-road safety seriously.