Badass Moto Roll Bar Fire Extinguisher Holder for Jeeps - Black 2-Pack

MSRP $67.99 USD

~~MSRP $67.99 USD~~ MSRP $67.99 USD

Sale Sold out

Product variants

Your Jeep gets driven hard. A loose fire extinguisher rolling around the floorboard is annoying on the highway and worse on the trail. The Badass Moto Roll Bar Fire Extinguisher Holder mounts a standard 2.5 lb extinguisher right to your roll bar where you can see it and grab it. Adjustable straps wrap around the bar in minutes with no drilling. Heavy-duty fabric and stainless steel hardware hold up to weather. Clean black finish that looks like it belongs on the Jeep. Fits Jeep Wrangler, Jeep Gladiator, and Ford Bronco.

Buy Now on Amazon

TL;DR

TWO COMPLETE HOLDERS IN ONE PACK – Mount one in your daily driver and one in a second rig, or keep a spare. Each holder mounts to the roll bar in minutes with adjustable straps. No drilling, no brackets, no permanent mods. Fits Jeep Wrangler, Jeep Gladiator, and Ford Bronco.
FITS A STANDARD 2.5 LB ABC FIRE EXTINGUISHER (NOT INCLUDED) – Sized for any 2.5 lb ABC extinguisher up to 3.25" diameter (Kidde FA110, Amerex B417T, First Alert HOME1). Also holds many common tall plastic water bottles.
STAYS PUT WHETHER YOU'RE ON THE HIGHWAY OR OFF-ROAD – Strap system holds the extinguisher firm against the roll bar so it doesn't rattle or shift. Easy hook-and-loop straps let you release the extinguisher quickly when you need it.
ADDS STYLE TO YOUR RIG – Sharp roll cage accessory with a clean, custom look that upgrades your roll cage. Built to turn heads at the trailhead and the parking lot.
BUILT FOR THE WEATHER YOUR JEEP LIVES IN – Heavy-duty strap material and corrosion-resistant stainless steel hardware hold up to sun, rain, mud, and dust.
NO-HASSLE LIFETIME DEFECT WARRANTY – If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder.

Buy Now on Amazon

Badass Moto Roll Bar Holder vs. Typical Roll Bar Extinguisher Holder

Feature	Badass Moto Roll Bar Holder	Typical Roll Bar Extinguisher Holder
Strap Material	Heavy-duty webbing	Thin webbing
Hardware	Corrosion-resistant stainless steel	Flimsy plastic
Mounting	Convenient adjustable strap mount that installs without tools in about a minute, no drilling required	Often requires brackets or permanent mods that require drilling
Roll Bar Fit	Removable wrap mount fits standard Jeep, Gladiator, and Bronco roll bars without any permanent alterations	Clamps and bolts may damage the vehicle roll cage
Extinguisher Fit	Any 2.5 lb ABC extinguisher up to 3.25" diameter (Kidde FA110, Amerex B417T, First Alert HOME1)	Often loose, undersized, or only fits mini extinguishers
Hold Stability	Tight strap system holds firm on highway and off-road	Loose fit, rattles or shifts
Release	Easy hook-and-loop quick release	Slow buckles or fixed brackets
Style	Clean black finish that integrates with the roll cage	Industrial or bulky utility look
Warranty	No-Hassle Lifetime Defect Warranty	Usually less than 12 months

Will This Fit My Vehicle?

Vehicle	Fitment
Jeep Wrangler	All standard roll bar configurations (CJ, YJ, TJ, JK, JKU, JL, JLU)
Jeep Gladiator	All standard roll bar configurations
Ford Bronco	All standard roll bar configurations (2021 and newer, 2-door and 4-door)
UTVs and side-by-sides (Polaris RZR, Yamaha YXZ, Kawasaki Teryx, Honda Pioneer, Can-Am Maverick, etc.)	Select our UTV-size extinguisher holder instead

Extinguisher	Fits
Standard 2.5 lb ABC extinguishers up to 3.25" diameter (such as the Kidde FA110, Amerex B417T, or First Alert HOME1)	Yes, primary design fit
Larger extinguishers (5 lb and up)	No
Tall water bottles	Yes, many common sizes

Note: fire extinguisher not included.

What Makes This Holder Easy to Install?

Most roll bar fire extinguisher holders make you commit. They want hose clamps that scratch your roll cage, brackets you have to bolt down, or worse, holes drilled into your rig. The Badass Moto Roll Bar Holder mounts with three adjustable hook-and-loop straps that wrap around the roll bar and lock tight. No tools. No drilling. No permanent alterations. If you decide to move it to a different bar, taking it off and repositioning it is fast and tool-free.

Three things make the install work:

Feature	Description
Three Adjustable Hook-and-Loop Straps	Sized to fit standard Jeep, Gladiator, and Bronco roll bar diameters. Each strap wraps the bar, cinches down, and locks tight for a no-shift hold. Quick to open when you want to reposition or remove the holder.
Stainless Steel D-Rings	The straps pull through corrosion-resistant stainless steel D-rings that snug the holder tight to the roll bar. The hardware stays solid after seasons of weather, mud, and washdowns.
Three-Point Grip	Three independent strap points distribute hold force across the roll bar so the holder stays put on rough trails and at highway speed.

Why Mount Your Extinguisher to the Roll Bar?

Carrying a fire extinguisher in your vehicle is a good safety practice. But an extinguisher rolling around the floorboard is a hassle, and you don't know where it is when you want it. Mounting it to the roll bar keeps it in a fixed, visible spot so you always know exactly where it is.

Feature	What It Does
Three-strap roll bar mount	Holds the extinguisher firm against the roll bar, prevents rolling and shifting
Visible mount position	Keeps the extinguisher in clear sight for convenient access
Hook-and-loop quick release	Hook-and-loop straps release quickly without tools

The extinguisher stays where you put it. No more hunting under the seat or kicking it across the floorboard.

Key Features

Feature	Description
Three-strap roll bar mount	Three independent hook-and-loop straps wrap around the roll bar for a secure hold
Heavy-duty webbing	Built to hold up to sun, rain, mud, and dust without stretching, fraying, or losing grip
Stainless steel D-rings	Corrosion-resistant hardware stays solid season after season
Easy tool-free install	Mounts in about a minute without drilling, brackets, or any permanent alterations to your roll cage
Fits standard 2.5 lb extinguishers	Holds any standard 2.5 lb ABC fire extinguisher up to 3.25" diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1 (extinguisher not included)
Quick-release hook-and-loop	Simply pull the straps to release the extinguisher
Sharp black finish with red accent	Roll cage accessory that upgrades the look of your interior
No-Hassle Lifetime Defect Warranty	If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder.

Care Instructions

Step	What to Do
Routine cleaning	Wipe the holder down with a damp cloth and water to remove dirt, dust, or trail debris
Heavy mud or grime	Rinse with a hose. Air-dry before reinstalling on the roll bar
Hook-and-loop straps	Pull off any embedded debris (gravel, leaves, twigs) so the closure stays tight. A stiff brush works well
Stainless steel D-rings	No special care needed. Stainless steel resists corrosion in normal use
What to avoid	Skip harsh chemicals, solvents, and bleach. They can break down the webbing fibers

Made to take a beating. A few minutes of cleanup after a muddy ride keeps it looking sharp for the long haul.

Why This Holder Is Worth a Few Dollars More

What You're Paying For	Why It Matters
Heavy-duty webbing instead of thin nylon	Holds shape and grip after seasons of sun, rain, and mud. Cheap straps fray and stretch in months.
Stainless steel D-rings instead of plastic	Plastic hardware degrades under UV and cracks or snaps under tension and cold. Stainless holds up.
Strap mount instead of hose clamps or brackets	No drilling, no scratches on your roll cage, no permanent damage. Move it or remove it whenever you want.
Fits real Jeep, Gladiator, and Bronco roll bars	Cheap holders are sized for generic tubes. This one is built for your rig.
No-Hassle Lifetime Defect Warranty	Most holders give you 30 to 90 days. We stand behind ours for as long as you own it.

What Owners Say About This Holder

Owners consistently call out the same things. Installation is fast, no tools needed, and the holder mounts to the roll bar in minutes. The stitching is heavy-duty and the hook-and-loop straps hold strong, even over rough terrain. The extinguisher stays where it's mounted and doesn't shift. The red logo and rugged look get steady mentions as a styling upgrade for the rig. And owners say it's fairly priced for the build quality. Most say they'd buy it again.

Frequently Asked Questions

What size fire extinguisher fits in this holder?

This holder fits any standard 2.5 lb ABC fire extinguisher up to 3.25" in diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. It does not fit larger 5 lb or commercial extinguishers. Many tall plastic water bottles also fit. Note: fire extinguisher not included.

What is the holder made of?

Heavy-duty woven webbing straps, hook-and-loop closures, and corrosion-resistant stainless steel D-rings. The webbing holds up to sun, rain, mud, and dust without stretching or fraying. The D-rings won't crack or rust like plastic or plain-steel hardware.

How do I clean and maintain the holder?

Wipe down with a damp cloth and water for routine cleaning. Rinse with a hose for heavier mud. Pull any embedded debris out of the hook-and-loop straps so the closure stays tight. Skip harsh chemicals, solvents, and bleach.

Will this fit my Jeep, Gladiator, or Bronco?

Yes. The holder fits all standard roll bar configurations on Jeep Wrangler (CJ, YJ, TJ, JK, JKU, JL, JLU), Jeep Gladiator, and Ford Bronco (2021 and newer). The three adjustable straps wrap around the roll bar for a secure, no-drilling install.

Will this fit my UTV or side-by-side?

No. For UTVs and side-by-sides like the Polaris RZR, Yamaha YXZ, Kawasaki Teryx, Honda Pioneer, and Can-Am Maverick, choose our UTV-size extinguisher holder (https://badassmotogear.com/products/utv-fire-extinguisher-mount), which is built for UTV roll cage dimensions.

Is the fire extinguisher included with the holder?

No. This is the holder only. We recommend a standard 2.5 lb ABC extinguisher up to 3.25" diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. You'll find them at auto parts stores, big box stores, hardware stores, and online.

What is the warranty?

Every Badass Moto Roll Bar Fire Extinguisher Holder is covered by our No-Hassle Lifetime Defect Warranty. If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder.

Q: What's included in the 2-pack?

Two complete Badass Moto Roll Bar Fire Extinguisher Holders. Each holder is identical to the single-pack version and includes three adjustable hook-and-loop straps and stainless steel D-rings. Fire extinguishers are not included.

Why does this holder cost more than the cheap ones?

Better materials, better hardware, better fit, and a real warranty. Cheap holders use thin webbing that frays, plastic hardware that cracks under UV and cold, and one-size-fits-nothing sizing. This one uses heavy-duty webbing, stainless steel D-rings, and is built to fit standard Jeep, Gladiator, and Bronco roll bars. And we back it with our Lifetime Defect Warranty instead of a 30-day return window.

Buy Now on Amazon

View full details