Badass Moto Seat Back Fire Extinguisher Holder - Black 6-Pack

MSRP $59.99 USD

~~MSRP $59.99 USD~~ MSRP $59.99 USD

Sale Sold out

Product variants

A fire extinguisher in your vehicle is a smart safety accessory, but only if you can actually get to it. The Badass Moto Seat Back Fire Extinguisher Holder mounts a full-size 2.5 lb extinguisher right to the back of your seat, where it stays out of the floorboard, off the trunk, and within easy reach. Hooks onto your headrest posts on top, with straps that loop under and around the seat rails to cinch it tight. No drilling, no brackets, no permanent modifications. Heavy-duty webbing and stainless steel hardware. Lift it off any time. Fits almost any vehicle with a removable two-post headrest, including cars, trucks, SUVs, vans, and Jeeps.

Buy Now on Amazon

TL;DR

6-PACK SEAT BACK FIRE EXTINGUISHER HOLDERS FOR CARS, TRUCKS, SUVS, VANS & JEEPS - OUTFIT MULTIPLE SEATS OR VEHICLES
– A fire extinguisher in your vehicle is a smart safety accessory. Three holders to outfit multiple seats in one vehicle, kit out family vehicles, or stock spares for a small fleet.

EASY INSTALL – NO TOOLS, NO DRILLING, FULLY REVERSIBLE
Hooks onto your headrest posts on top, straps loop under and around the seat rails to cinch the holder snug. Easy install in just a few minutes. No permanent modifications. Lift it off any time, also ideal for leased or fleet vehicles.

FITS A STANDARD 2.5 LB ABC FIRE EXTINGUISHER (NOT INCLUDED)
Sized for any standard 2.5 lb ABC fire extinguisher up to 3.25 inch diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. Three hook-and-loop straps wrap the extinguisher itself. Pull to release when you need to grab it. Also holds many common tall plastic water bottles.

BETTER THAN MINI AEROSOLS OR FLOOR-MOUNTED BRACKETS
Holds a real 2.5 lb extinguisher, not the mini aerosol cans typically sold for cars. And unlike floor-mounted brackets, this holder isn't underfoot, doesn't collect dirt, and doesn't require drilling holes in your vehicle.

BUILT FOR DAILY USE
Durable, heavy-duty webbing and corrosion-resistant stainless steel hardware. Holds up to UV, heat, and the everyday abuse of a working vehicle interior.

NO-HASSLE LIFETIME DEFECT WARRANTY
If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder.

Buy Now on Amazon

Badass Moto Seat Back Holder vs. Typical Vehicle Extinguisher Mount

Feature	Badass Moto Seat Back Holder	Typical Vehicle Extinguisher Mount
Strap Material	Heavy-duty webbing	Thin webbing
Hardware	Corrosion-resistant stainless steel	Flimsy plastic
Mounting	Tool-free headrest post and seat rail straps, no drilling, fully reversible	Often requires drilling, brackets, or hose clamps
Vehicle Fit	Any vehicle with a removable two-post headrest, including cars, trucks, SUVs, vans, and Jeeps	Limited to specific vehicles or generic universal-fit that doesn't actually fit anything well
Extinguisher Fit	Any 2.5 lb ABC extinguisher up to 3.25" diameter (Kidde FA110, Amerex B417T, First Alert HOME1)	Often loose, undersized, or only fits mini extinguishers
Location	Easy access seat back, off the floor, out from underfoot	Floor-mount brackets sit underfoot and collect dirt
Release	Easy hook-and-loop quick release	Slow buckles or fixed brackets
Warranty	No-Hassle Lifetime Defect Warranty	Often less than 12 months

Will This Fit My Vehicle?

Vehicle	Fitment
Cars	Most cars with a removable two-post headrest
Trucks	Most trucks with a removable two-post headrest
SUVs	Most SUVs with a removable two-post headrest
Vans	Most vans with a removable two-post headrest
Jeeps	Most Jeep models with a removable two-post headrest. For roll bar mount installation instead, see our Roll Bar Holder for Jeeps: https://badassmotogear.com/products/badass-moto-adjustable-roll-bar-mounted-fire-extinguster-holder-for-jeeps-black
Vehicles with fixed (non-removable) headrests	Not compatible
Race seats with built-in head restraints	Not compatible

Extinguisher	Fits
Standard 2.5 lb ABC extinguishers up to 3.25" diameter (such as the Kidde FA110, Amerex B417T, or First Alert HOME1)	Yes, primary design fit
Larger extinguishers (5 lb and up)	No
Tall water bottles	Yes, many common sizes

Pro tip: This holder is built for full-size 2.5 lb extinguishers. Diameters between roughly 2.75" and 3.25" fit best. Mini and aerosol-style extinguishers are too narrow. Note: fire extinguisher not included.

What Makes This Holder Easy to Install?

Most vehicle fire extinguisher mounts make you commit. They want brackets bolted to the floorboard, holes drilled in your trim, or hose clamps that scratch up your interior. The Badass Moto Seat Back Holder anchors to your existing headrest posts on top and uses long adjustable straps that loop under and around the seat rails to cinch it snug against the seat back. No tools. No drilling. No permanent alterations. Take it off any time and your vehicle interior is exactly as it was.

Three things make the install work:

Feature	Benefit
Headrest Post Mount	Anchors to your existing two-post headrest. The mount slides onto the headrest posts so the top of the holder is locked in place by the same hardware that secures your headrest.
Cinching Seat Rail Straps	Long adjustable straps loop under and around the seat rails. Pull the straps to cinch the holder tight against the seat back so it doesn't shift, sag, or rotate during a drive.
Stainless Steel Hardware	Corrosion-resistant stainless steel where it matters. Holds up to UV, heat, and everyday cabin abuse. No plastic to crack or fade.

Why Mount Your Extinguisher to the Seat Back?

A fire extinguisher in your vehicle is a smart safety accessory. But an extinguisher rolling around the floorboard, sliding around the trunk, or buried in the glove box is a hassle, and you don't know where it is when you want it. Mounting it to the seat back keeps it fixed in a known spot you can see and reach without contorting yourself.

Feature	What It Does
Headrest Post and Seat Rail Mount	Holds the extinguisher firm against the seat back, prevents rolling, sliding, and shifting
Visible Mount Position	Keeps the extinguisher in clear sight, easy to grab when you need it
Hook-and-Loop Quick Release	Three hook-and-loop straps wrap the extinguisher and release quickly without tools

The extinguisher stays where you put it. No more hunting under the seat, digging through the trunk, or kicking it across the floorboard.

Key Features

Feature	Description
Headrest Post and Seat Rail Mount	Anchors to the headrest posts on top and cinches under and around the seat rails for a secure, no-shift hold
Heavy-Duty Webbing	Built to hold up to UV, heat, and everyday cabin abuse without stretching, fraying, or losing grip
Stainless Steel Hardware	Corrosion-resistant hardware stays solid year after year. No plastic to crack or fade.
Tool-Free, Fully Reversible Install	Mounts in just a few minutes. No drilling, brackets, or permanent alterations. Lift it off any time. Ideal for leased or fleet vehicles.
Fits Standard 2.5 lb Extinguishers	Holds any standard 2.5 lb ABC fire extinguisher up to 3.25" diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1 (extinguisher not included)
Quick-Release Hook-and-Loop	Three hook-and-loop straps wrap the extinguisher itself. Simply pull the straps to release.
Off the Floor, Out from Underfoot	Unlike floor-mount brackets, the seat back location keeps the extinguisher off the floor and out from underfoot
No-Hassle Lifetime Defect Warranty	If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder.

Care Instructions

Step	What to Do
Routine Cleaning	Wipe the holder down with a damp cloth and water to remove dust, crumbs, or everyday cabin debris
Heavier Spills or Stains	Spot-clean with a damp cloth. Let air-dry before remounting.
Hook-and-Loop Straps	Pull off any embedded debris (lint, hair, food crumbs) so the closure stays tight. A stiff brush works well
Stainless Steel Hardware	No special care needed. Stainless steel resists corrosion in normal use
What to Avoid	Skip harsh chemicals, solvents, and bleach. They can break down the webbing fibers

Made to live in your vehicle day in, day out. Quick cleanups keep it looking sharp for the long haul.

Why This Holder Is Worth a Few Dollars More

What You're Paying For	Why It Matters
Heavy-Duty Webbing Instead of Thin Nylon	Holds shape and grip after years of UV, heat, and everyday cabin use. Cheap straps fray and stretch in months.
Stainless Steel Hardware Instead of Plastic	Plastic hardware degrades under UV and cracks or snaps under tension and cold. Stainless holds up.
Headrest Post and Seat Rail Mount Instead of Drilled Brackets	No drilling, no scratches, no permanent damage to your interior. Move it or remove it whenever you want. Ideal for leased or fleet vehicles.
Built for a Real 2.5 lb Extinguisher Instead of a Mini Aerosol	A full-size 2.5 lb ABC extinguisher holds more agent than the mini aerosol cans typically sold for cars. Cheap holders often only fit the mini ones.
No-Hassle Lifetime Defect Warranty	Most holders give you 30 to 90 days. We stand behind ours for as long as you own it.

What Owners Say About This Holder

Owners consistently call out the same things. Setup is fast and tool-free, just a few minutes with the adjustable straps and buckles. The build feels well made, with heavy-duty webbing and stainless steel hardware that holds up to daily cabin use. The extinguisher stays put and doesn't slide or shift during a drive, including on off-road runs. Owners running it in trucks and SUVs like the Ford F-150 and Chevy Silverado note that it installs without drilling holes or scratching the interior, and is fully reversible for leased vehicles. Most call it a great value and say they'd buy it again.

Frequently Asked Questions

What size fire extinguisher fits in this holder?

This holder fits any standard 2.5 lb ABC fire extinguisher up to 3.25" in diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. It does not fit larger 5 lb or commercial extinguishers. Many tall plastic water bottles also fit. Note: fire extinguisher not included.

What is the holder made of?

Heavy-duty woven webbing straps, hook-and-loop closures, and corrosion-resistant stainless steel hardware. The webbing holds up to UV, heat, and everyday cabin use without stretching or fraying. The stainless steel hardware won't crack or rust like plastic or plain-steel.

How do I clean and maintain the holder?

Wipe down with a damp cloth and water for routine cleaning. Spot-clean spills or stains and let air-dry. Pull any embedded debris (lint, hair, food crumbs) out of the hook-and-loop straps so the closure stays tight. Skip harsh chemicals, solvents, and bleach.

Will this fit my vehicle?

Yes, if your vehicle has a removable two-post headrest. The holder works with most cars, trucks, SUVs, vans, and Jeeps. The mount slides onto the headrest posts on top, and adjustable straps loop under and around the seat rails to cinch the holder snug against the seat back. No drilling, no brackets, no permanent modifications. Jeep owners who prefer a roll bar mount can use our Roll Bar Holder for Jeeps: https://badassmotogear.com/products/badass-moto-adjustable-roll-bar-mounted-fire-extinguster-holder-for-jeeps-black

What if my seat has a fixed (non-removable) headrest or built-in head restraint?

This holder will not work. It depends on the headrest posts as the top anchor. Race seats with built-in head restraints and vehicles with fixed headrests are not compatible.

Is the fire extinguisher included with the holder?

No. This is the holder only. We recommend a standard 2.5 lb ABC extinguisher up to 3.25" diameter, such as the Kidde FA110, Amerex B417T, or First Alert HOME1. You'll find them at auto parts stores, big box stores, hardware stores, and online.

What is the warranty?

Every Badass Moto Seat Back Fire Extinguisher Holder is covered by our No-Hassle Lifetime Defect Warranty. If a manufacturer defect occurs, it's covered. No shipping fees. No need to return the old holder.

Why does this holder cost more than the cheap ones?

Better materials, better hardware, better fit, and a real warranty. Cheap holders use thin webbing that frays, plastic hardware that cracks under UV and cold, and they often only fit mini aerosol extinguishers. This one uses heavy-duty webbing, stainless steel hardware, and is sized for a real 2.5 lb ABC extinguisher. And we back it with our Lifetime Defect Warranty instead of a 30-day return window.

What's included in the 6-pack and who's it for?

The 6-pack contains six identical Badass Moto Seat Back Fire Extinguisher Holders in black. Common use cases: small commercial fleets, rental fleets, dealership inventory, multi-vehicle households, or large-vehicle outfitters who want spares on hand. Each holder fits a standard 2.5 lb ABC fire extinguisher up to 3.25" diameter (extinguishers not included).

Buy Now on Amazon

View full details